/출처  : bakedecoratecelebrate 

 

baking3dbearcake_step1.jpg

Step 1: Prepare Pan

Preheat oven to 350°F. Generously coat the inside of both pan halves and both the inside and outside of the baking core using Wilton Cake Release or solid shortening. Be sure to cover all indentations. If using shortening, sprinkle about 2 tablespoons flour inside each pan half and shake so flour covers all greased surfaces. Turn pan halves upside down and tap lightly to remove excess flour. If any shiny spots remain, touch up with more shortening and flour to prevent cake from sticking.

 

baking3dbearcake_step2.jpg

Step 2: Fasten Pan with Clips

Fasten pan halves together with clips, making sure the halves fit snugly together.

 

baking3dbearcake_step3.jpg

Step 3: Mix and Pour Batter

Make cake mix according to package directions, or use your favorite scratch recipe. (Most 3-D pans require 5 1/2 - 6 1/4 cups of batter). Pound cake or a combination of pound cake and yellow or chocolate batters offer the best results. Batters that contain nuts or raisins do not work well. Place pan on cookie sheet. Pour cake batter into pan.

 

baking3dbearcake_step4.jpg

Step 4: Bake Cake

Insert baking core into center. The batter in the pan will come right to the rim, almost to the point of overflowing. Cake fills out best when batter overflows slightly while baking. Secure core by slipping tabs of longer prongs under the sides of the pan. Pour 2/3 cup batter into core. Bake 50-60 minutes, until toothpick inserted in vent hole on top of pan comes out clean. Top half of pan may be removed during last ten minutes of baking to check cake.

 

baking3dbearcake_step5.jpg

Step 5: Cool Cake

When cake is done, remove from oven and place upside down on cooling rack 5-10 minutes. Remove top half of pan and cool 5 minutes more. Replace top pan, turn cake over and remove bottom pan. It may be necessary to tap pan with the handle of a spatula to free cake from pan. Cool 15-30 minutes.

 

baking3dbearcake_step6.jpg

Step 6: Remove Pans and Cool

Remove pans; gently remove the baking core and the baked cake center. Set cake upright and cool completely.

 

baking3dbearcake_step7.jpg 

Step 7: Fill in Cake Center and Decorate

Place the cake center inside the bear, filling any empty areas with buttercream icing. Position cake upright on plate, and secure to plate with icing or melted candy. Your teddy bear cake is now ready to decorate!

 

이 게시물을...
profile